CPT code 99417 is an add-on code reporting prolonged office or outpatient E/M services beyond the maximum time of the highest-level base code (99205 or 99215).
It belongs to the E/M category and is reported in 15-minute increments for time exceeding the base-code range. The base E/M must be selected by time — not MDM — for 99417 to apply.
The most consequential compliance fact about 99417 is that Medicare does not pay it. Medicare uses its own prolonged-service add-on, G2212, at different time thresholds.
Billing 99417 to Medicare results in denial. The code applies to commercial payers, Medicaid (in states that recognize it), and other non-Medicare lines of business.
Even among commercial payers, coverage varies — some follow the CPT thresholds while others impose their own rules or do not cover prolonged services at all.
What does CPT code 99417 cover?
99417 captures physician or qualified health professional (QHP) time that exceeds the maximum of the highest-level office E/M code.
The code exists because some encounters legitimately run well beyond the 99205 or 99215 time range — complex care coordination, multiple-problem visits in patients with serious illness, goals-of-care conversations, and lengthy diagnostic workups.
Without 99417, the time beyond the base code maximum goes uncompensated.
| Detail | CPT 99417 |
| Description | Prolonged office/outpatient E/M, each additional 15 min |
| Category | E/M — Prolonged Services (add-on) |
| Patient type | New or established |
| MDM level | N/A (base code must use time) |
| Time | Each 15 min beyond the base-code maximum |
| First unit threshold | 75 min (with 99205) or 55 min (with 99215) |
| Medicare coverage | Not payable (use G2212) |
| Non-facility rate (commercial median) | ~61-70 per unit |
| Commonly compared with | G2212 |
CPT Code Snapshot
99417 — Prolonged E/M Add-On
Code Type
Add-On
Cannot stand alone
Unit
15 min
Per unit beyond base code
Medicare
Not payable
Use G2212 instead
Prolonged visits captured accurately
MedHeave routes prolonged-service claims to the correct add-on code based on payer — 99417 for commercial, G2212 for Medicare — preventing denials caused by wrong-code submission and incorrect time thresholds.
When should you use CPT 99417?
99417 applies only when the total physician/QHP time exceeds the maximum of the highest-level base code, and the base code was selected by time — not MDM.
Both conditions must be met, and the payer must be non-Medicare.
Use CPT 99417 when
- The base E/M code is 99205 (new patient) or 99215 (established patient) selected by time
- Total physician/QHP time exceeds the base code’s maximum (74 minutes for 99205, 54 minutes for 99215)
- The first unit requires at least 15 minutes beyond the base-code maximum — 75 minutes for 99205, 55 minutes for 99215
- The payer is commercial or Medicaid (not Medicare)
A 62-year-old established patient with newly diagnosed cancer presents for a 70-minute visit involving treatment options discussion, care coordination, medication review, and referral planning.
The physician selects 99215 by time (40-54 min) and reports one unit of 99417 for the 16 minutes beyond the 54-minute maximum.
When not to use it
99417 has more disqualifying conditions than most E/M codes because it is an add-on with strict prerequisites. The most common mistake is applying it when the base code was selected by MDM rather than time.
- The payer is Medicare — use G2212 at different thresholds (89 min with 99205, 69 min with 99215)
- The base E/M was selected by MDM rather than time — 99417 requires time-based code selection
- Total time does not exceed the base-code maximum — no prolonged service occurred
- The base E/M is lower than 99205/99215 — 99417 can only be reported with the highest-level codes
- The time spent was on a separately billed service (psychotherapy, procedure) — those minutes do not count toward the E/M
How is CPT 99417 selected?
99417 selection depends on three factors — the base code, the code-selection method (must be time, not MDM), and the total qualifying minutes.
The time thresholds differ between new and established patients because the base codes have different time ranges.
Time thresholds
The first 99417 unit begins at the minute after the base code’s maximum. Each additional unit requires 15 more qualifying minutes.
| Base code | Base time range | First 99417 unit | Second 99417 unit |
| 99205 (new) | 60-74 min | 75-89 min | 90-104 min |
| 99215 (established) | 40-54 min | 55-69 min | 70-84 min |
Qualifying time includes face-to-face and non-face-to-face activities on the date of encounter — examining the patient, reviewing results, ordering tests, counseling, care coordination, and documenting.
It excludes time attributable to separately billed services (psychotherapy, procedures) and time spent by clinical staff without the physician or QHP present.
Time Thresholds
When does each 99417 unit begin?
With 99205 (new patient)
Base range → 60-74 min
1st unit → 75-89 min
2nd unit → 90-104 min
With 99215 (established)
Base range → 40-54 min
1st unit → 55-69 min
2nd unit → 70-84 min
What documentation supports CPT 99417?
Time documentation is the foundation of every 99417 claim. Without precise, auditable time records, the add-on cannot survive a payer review — regardless of how complex the encounter was.
The note must document:
- Total physician/QHP time spent on the date of encounter
- Breakdown of activities performed during that time, including:
- Examination
- Counseling
- Care coordination
- Documentation
- Test review
- Statement confirming that the base E/M code was selected based on time
- Medical necessity justifying the extended encounter, explaining why the visit required more time than the base code range
Start and stop times are not required by CPT but are strongly recommended because they provide the clearest audit defense.
The time documentation should exclude any minutes attributed to separately billed services performed during the same encounter.
If a procedure or psychotherapy session occurred on the same day, those minutes belong to their own CPT code and cannot also be counted toward the E/M.
How much does CPT 99417 reimburse?
The commercial rate for 99417 is roughly double Medicare’s G2212 rate per unit: ~ 65 versus ~34. Combined with lower time thresholds, 99417 can represent meaningful additional revenue on commercial claims for practices with genuinely long visits.
| Payment type | Rate per unit (2026) |
| Medicare | Not payable (use G2212 at ~$34.07/unit) |
| Commercial payers (median) | ~61-70 |
| Medicaid | Varies by state |
Commercial rates from FAIR Health national estimates (2026). G2212 Medicare rate from CMS 2026 PFS.
A 70-minute established-patient visit billed to a commercial payer with 99215 + one unit of 99417 produces approximately $186 + $65 = $251 in total reimbursement.
The same visit billed to Medicare with 99215 + G2212 yields approximately $186 + $34 = $220 — and the G2212 unit would not even qualify at 70 minutes because Medicare’s threshold starts at 69 minutes, leaving only one qualifying minute.
Which modifiers apply to CPT 99417?
99417 rarely requires modifiers because it is already an add-on with a built-in qualifying base code. The add-on status means it cannot stand alone and inherits the encounter context from 99205 or 99215.
| Modifier | When it applies |
| 95 | Telehealth — when the prolonged E/M occurs via synchronous audio-video and the payer recognizes telehealth prolonged services |
Do not apply modifier 25 to 99417 — it is an add-on code, not a standalone E/M.
Do not use 99417 for Medicare — submit G2212 instead. Modifier 25 belongs on a separate E/M service billed alongside a procedure, not on a time extension of the same E/M.
CPT 99417 vs. G2212 — which one fits?
Both report prolonged office E/M time, but the payer determines which code to use and which time thresholds apply. Applying the wrong code or the wrong threshold to the wrong payer is the most common 99417 compliance failure.
| Feature | CPT 99417 | HCPCS G2212 |
| Payer | Commercial, Medicaid | Medicare |
| First unit with 99205 | 75 min | 89 min |
| First unit with 99215 | 55 min | 69 min |
| Unit increment | 15 min | 15 min |
| Rate per unit | ~61-70 (commercial) | ~$34.07 (Medicare) |
Use 99417 for commercial and Medicaid payers that recognize it. Apply CPT time thresholds (55/75 min). Use G2212 for Medicare. Apply Medicare’s higher time thresholds (69/89 min).
Never bill both for the same encounter. Never apply 99417 thresholds to Medicare claims or G2212 thresholds to commercial claims.
The threshold mismatch produces either an invalid claim (99417 to Medicare) or an underbilled claim (G2212 thresholds on a commercial 99417).
Code Comparison
99417 (CPT) vs. G2212 (Medicare)
99417
Payer
Commercial / Medicaid
First Unit (99215)
55 min
Rate per Unit
~61-70
G2212
Payer
Medicare
First Unit (99215)
69 min
Rate per Unit
~$34.07
Never bill both for the same visit. Never apply CPT thresholds to Medicare or Medicare thresholds to commercial. Match the code and the threshold to the payer.
What billing errors should you avoid with CPT 99417?
99417 has more disqualifying conditions than most E/M codes, which concentrates denial risk around five specific error patterns. Most of these errors are preventable at the coding stage rather than the documentation stage.
1. Billing 99417 to Medicare
Medicare does not recognize CPT 99417. Submitting it to a Medicare plan (traditional Medicare or most Medicare Advantage) results in an automatic denial.
The correct Medicare prolonged-service add-on is G2212, which uses higher time thresholds (69 min with 99215, 89 min with 99205).
Practices that see both Medicare and commercial patients need payer-specific coding workflows — the wrong code cannot be corrected by rebilling without a corrected claim submission.
2. Applying Medicare time thresholds to commercial claims
99417 starts at 55 minutes with 99215 (or 75 with 99205).
G2212 starts at 69 minutes with 99215 (or 89 with 99205). Using Medicare’s higher thresholds for a commercial 99417 claim leaves 14 minutes of reimbursable time uncaptured on established-patient encounters.
A 62-minute visit billed to a commercial payer qualifies for one unit of 99417, but the same visit would not yet qualify for G2212 under Medicare rules. Billing staff must apply the correct payer-specific thresholds.
3. Base code selected by MDM instead of time
99417 requires the base E/M to be selected by time, not MDM. If 99215 was chosen based on high MDM complexity and the physician spent 50 minutes, 99417 does not apply — the base code was not selected by time.
The physician must affirmatively elect the time-based pathway in the documentation.
When both MDM and time independently support 99215, the note must state that code selection was based on time to justify the 99417 add-on.
4. Base code below 99205/99215
99417 can only be reported with the highest-level office E/M codes.
A 45-minute visit coded as 99214 by time does not support 99417 — the visit falls within the 99214 time range (30-39 min), not beyond the 99215 maximum.
The provider would need to document that the visit meets the 99215 time range before any prolonged time beyond it can qualify for 99417. Undercoding the base E/M eliminates the add-on entirely.
5. Counting separately billed service time
Procedure time, psychotherapy time, and time attributed to other separately reported services do not count toward the E/M total. Only qualifying E/M time applies.
A visit where 30 minutes are spent on psychotherapy (90833) and 50 minutes on E/M work does not qualify for 99417 — the E/M time alone (50 minutes) falls within the 99215 range.
Billing staff must subtract separately billed service time before calculating 99417 eligibility.
Frequently asked questions about CPT 99417
Here are some commonly asked questions on this topic:
CPT 99417 is an add-on code reporting prolonged office or outpatient E/M services in 15-minute increments beyond the maximum time of the highest-level base code (99205 for new patients or 99215 for established patients). The base code must be selected by time, not MDM, and 99417 cannot be reported with any base code lower than the highest level. Medicare does not pay 99417 — practices must use HCPCS G2212 for Medicare prolonged services, which applies different, higher time thresholds and reimburses at roughly half the commercial rate.
With 99205 (new patient), the first unit starts at 75 total minutes — 15 minutes beyond the 74-minute base code maximum. With 99215 (established patient), the first unit starts at 55 total minutes — 15 minutes beyond the 54-minute maximum. Each additional unit requires 15 more qualifying minutes. Qualifying time includes face-to-face and non-face-to-face physician or QHP activities on the date of encounter but excludes time spent on separately billed services such as procedures or psychotherapy. Medicare’s G2212 uses higher starting thresholds (89 min with 99205, 69 min with 99215).
Payer and time thresholds are the two differences. CPT 99417 applies to commercial and Medicaid payers with CPT time thresholds (first unit at 55 min with 99215, or 75 min with 99205). HCPCS G2212 applies exclusively to Medicare with higher thresholds (first unit at 69 min with 99215, or 89 min with 99205). Both use 15-minute unit increments. Never bill both for the same visit or apply one code’s thresholds to the other code’s payer.
Yes, without exception. The base E/M (99205 or 99215) must be selected by time, not by MDM. If MDM independently supports the highest-level code but the physician did not elect the time-based pathway, 99417 cannot be reported — even if the total encounter time exceeded the base code maximum. The documentation must explicitly state that code selection was based on total time to justify the add-on. A note that simply lists the total minutes without specifying time-based selection leaves the 99417 vulnerable to denial on audit.